PSDGLIST Archives

March 2013

PSDGLIST@LISTS.MICROBIOLOGYNETWORK.COM

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Sanjay Dwivedi <[log in to unmask]>
Reply To:
Pharmaceutical Stability Discussion Group <[log in to unmask]>
Date:
Sat, 16 Mar 2013 19:46:20 +0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (77 lines)
Dear Chris,

Samples shall be taken ideally in the begining/middle/end.
A composite sample then be prepared and put on stability or testing as applicable

Regards,
Sanjay Dwivedi


----- Original Message -----
From: Chris <[log in to unmask]>
To: [log in to unmask]
Cc: 
Sent: Thursday, 14 March 2013 9:28 PM
Subject: [PSDGLIST] B/M/E Sampling and Testing for Injectables

Hi everyone,

I hope this email finds you all doing well.  This is the first time I am posting on this message board and I am excited to hear your responses!

I have a couple industry related questions regarding sampling and stability testing of injectable (fluid) samples.  We are currently considering our drug product homogeneous.  If you, anyone on your team, or someone else you can direct me to, has guidance on this topic, it would be much appreciated.  We know that it is common industry practice with regard to solid dosage products to make a composite sample (beginning/middle/end), which should be homogeneous and statistically representative of the lot/batch blend.  When I worked in solid dosage, we put all collected beginning / middle / end samples in the stability chamber and then made a composite out of those samples at a specific time point pull.  This composite was then used for testing at the various pulls.

I have questions regarding stability testing of our injectable (fluid) product.  The discussion is around what is appropriate for sample pulls of an injectable product and whether there is a defined standard to make sure the lot/batch is tested in a way that one would feel comfortable that it is representative of the entire lot/batch.

Should samples be pulled at the beginning, middle and end (B/M/E) for an injectable product or, since we consider the entire batch homogeneous, only pull one sample at the end of the batch?

If B/M/E samples should be pulled, do we keep all of these samples separate when we place them in the stability chamber or can we make a composite just prior to placing them in the chamber?

If B/M/E samples are kept separate, do we need to test them all separately at each time point pull?  Or, can we make a composite of the B/M/E samples just prior to testing?

Is the answer clear or does it depend on other factors like:  overall size of the batch that is made;  whether your company considers the batch homogeneous ; etc?

Some of these scenarios will obviously lead to more space being taken up in the stability chambers and require much more testing to be performed (3 samples at each time point instead of 1 composite sample). 

If anyone has any experience or could lead me in the right direction with injectable products, it would be very helpful and appreciated. 

Thank you!

Chris

=================================
The nature of this service is to provide a medium for communication.  The specific statements and endorsements of individuals participating in the discussions are not necessarily those of The Microbiology Network, Inc., the PSDG, or the sponsors of the list.

------------------
The PSDGList (http://microbiol.org/psdglist.htm) is operated from The Microbiology Network (http://www.microbiol.org) and supported by our sponsors as a service to the scientific community.   Please take a second to visit our sponsors' web sites and say thank you for their support of this service.

BahnsonEnvironmental Specialties - http://www.eschambers.com/
   Manufacturer of Quality Stability Chambers, Warm & Cold Rooms, Freezers and
   Ultra Low Storage Chambers with Complete Validation, Maintenance & Calibration

Stability Environments, Inc., an affiliate of Solar Light Company, Inc. - http://www.StabilityEnvironments.com
   High quality controlled environmental walk-in rooms and reach-in chambers
   Full installation, validation and spare parts also available

Hardy Diagnostics - http://www.HardyDiagnostics.com
    Provides a complete selection of laboratory and microbiology supplies
    for the clinical, industrial, and molecular biology research communities.


=================================
The nature of this service is to provide a medium for communication.  The specific statements and endorsements of individuals participating in the discussions are not necessarily those of The Microbiology Network, Inc., the PSDG, or the sponsors of the list.

------------------
The PSDGList (http://microbiol.org/psdglist.htm) is operated from The Microbiology Network (http://www.microbiol.org) and supported by our sponsors as a service to the scientific community.   Please take a second to visit our sponsors' web sites and say thank you for their support of this service.

BahnsonEnvironmental Specialties - http://www.eschambers.com/
   Manufacturer of Quality Stability Chambers, Warm & Cold Rooms, Freezers and
   Ultra Low Storage Chambers with Complete Validation, Maintenance & Calibration

Stability Environments, Inc., an affiliate of Solar Light Company, Inc. - http://www.StabilityEnvironments.com
   High quality controlled environmental walk-in rooms and reach-in chambers
   Full installation, validation and spare parts also available

Hardy Diagnostics - http://www.HardyDiagnostics.com
    Provides a complete selection of laboratory and microbiology supplies
    for the clinical, industrial, and molecular biology research communities.

ATOM RSS1 RSS2